Honeywell SmartDrive Compact, Руководство пользователя

Страница: 68 / 75

Honeywell
Parameter Descriptions 67
9
9.12.1 Modbus process data
Process data is an address area for fieldbus control. Fieldbus control is active when
the value of parameter 2.1 (Control place) is 3 (=fieldbus). The contents of the proc-
ess data has been determined in the application. The following tables present the
process data contents in the GP Application.
ID Modbus register Name Scale Type
2101 32101, 42101 FB Status Word - Binary coded
2102 32102, 42102 FB General Status Word - Binary coded
2103 32103, 42103 FB Actual Speed 0,01 %
2104 32104, 42104 Motor freq. 0,01 +/- Hz
2105 32105, 42105 Motor speed 1 +/- Rpm
2106 32106, 42106 Motor current 0,01 A
2107 32107, 42107 Motor torque 0,1 +/- % (of nominal)
2108 32108, 42108 Motor power 0,1 +/- % (of nominal)
2109 32109, 42109 Motor voltage 0,1 V
2110 32110, 42110 DC voltage 1 V
2111 32111, 42111 Active fault - Fault code
Table 9.3: Output process data
ID Modbus register Name Scale Type
2001 32001, 42001 FB Control Word - Binary coded
2002 32002, 42002 FB General Control Word - Binary coded
2003 32003, 42003 FB Speed Reference 0,01 %
2004 32004, 42004 PI Control Reference 0,01 %
2005 32005, 42005 PI Actual value 0,01 %
2006 32006, 42006 - - -
2007 32007, 42007 - - -
2008 32008, 42008 - - -
2009 32009, 42009 - - -
2010 32010, 42010 - - -
2011 32011, 42011 - - -
Table 9.4: Input process data