manualshive.com logo in svg

Honeywell SILENT KNIGHT SK-5208, Инструкция по установке и эксплуатации

Поделиться
Скачать
Honeywell SILENT KNIGHT SK-5208 Скачать руководство пользователя страница 93

Operation

P/N 151204

5-11

5.8.1.2 Having Remote Computer Call the Control Panel

If the computer initiates the call then answering machine bypass (see Section 4.2.8) may need 
to be selected.

To initiate communication:

1. From the SKSS Up/Downloading software File Menu, select the download or upload 

menu item you want to schedule. 

2. In the appropriate locations in the dialog box, enter your selections for the following 

options:

File Name:

To download, select the file that you want to download. To upload 
assign a name to the file that will be uploaded from the panel. You 
can use the Browse option to select from the list of available files. If 
you do not select a name for the file, it will be automatically named 
with the panel model and the date and time of the download.

For downloads, the latest saved version of the file will be sent. This 
means if the file you want to send is currently open and has been 
changed, save it before you attempt to download. 

Account 

Number:

Enter the panel account number. 

Computer Code:

Enter the code that allows access to the panel from a PC.

Phone Number:

Enter the panel phone number.

Call Option:

Select how often and when the call should be placed.

Answering:

Select the preferred options if the phone line used by the control 
panel has an answering machine installed. This feature is not used 
when connecting directly to a panel.

3. Click 

OK

 to begin downloading/uploading or to post the job to the Queue.

Download Menu

Upload Menu

firealarmresources.com

Содержание SILENT KNIGHT SK-5208



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды