Honeywell Silent knight 5895XL Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 48

Honeywell Silent knight 5895XL Скачать руководство пользователя страница 9

6

5895XL Manual - P/N 151142-L8:L 08/09/2017

Before You Begin Installing

Inventory

Section 2: Before You Begin Installing

2.1 Inventory

The Model 5895XL ships with the following hardware:

•

A cabinet with all hardware assembled

•

Two keys for the front door

•

Ten 4.7K ohm end-of-line resistors

•

A battery cable for batteries wired in series

2.2 Environmental Specifications

It is important to protect the 5895XL control panel from water. To prevent water damage, the following precautions should be FOL-
LOWED when installing the units:

•

Do not mount directly on exterior walls, especially masonry walls (condensation)

•

Do not mount directly on exterior walls below grade (condensation)

•

Protect from plumbing leaks

•

Protect from splash caused by sprinkler system inspection ports

•

Do not mount in areas with humidity-generating equipment (such as dryers, production machinery)

When selecting a location to mount the 5895XL, the unit should be mounted where it will NOT be exposed to temperatures outside the
range of 0°C-49°C (32°F-120°F) or humidity outside the range of 10%-93% at 30°C (86°F) non-condensing.

2.3 Software Downloads

In order to supply the latest features and functionality in fire alarm and life safety technology to our customers, we make frequent
upgrades to the embedded software in our products. To ensure that you are installing and programming the latest features, we strongly
recommend that you download the most current version of software for each product prior to commissioning any system. Contact Hon-
eywell Silent Knight Technical Support with any questions about software and the appropriate version for a specific application. Soft-
ware updates can be found at www.silentknight.com

NOTE:

For UL installations 4.7k



end-of-line resistor (ordered separately) must be used.

«
...
7
8
9
10
11
...
»

Содержание Silent knight 5895XL

















































Отзывы:

Нет отзывов