Honeywell ScanPal EDA51, Руководство пользователя

Страница: 31 / 100

EDA51 User Guide 21
About Status Bar Icons
Status and notification icons show you the current status of your network, the
battery, notifications, and sounds. Use the table below to understand some of the
most common icons.
Status and Notification Icons
Remap a Button
You can change the default function of the physical buttons (e.g., Left Scan, Right
Scan, Volume up and Volume down).
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Keyremap .
3. Tap the plus sign (+).
4. Press the button you want to remap.
5. Tap OK .
6. Select a tab to use for remapping, and then select or enter a value as required.
• KEYS
Choose a key function to assign to the selected key.
• APPS
Select an app that will launch when the selected button is pressed.
• ACTIONS
Enter an action that will be executed when the button is pressed, for
example, "com.android.settings/com.android.settings.wifi.WifiSettings".
Icon Description Icon Description
Pending alarm and Alarm is set Vibrate mode is turned On
New text message or
multimedia message Airplane mode is turned On
Error with text or multimedia
message delivery Bluetooth is turned On
New email SD card is full
Computer is connected to a PC
with a SUSB cable Wi-Fi network is connected with full
signal strength
Synchronizing data Wi-Fi network is connected but no
signal strength
Error with sync or sign-in Phone connected with full amount
of bars
Computer is connected with
Ethernet Phone connected with full amount
of bars but no internet connection