Honeywell ScanPal EDA51 Скачать руководство пользователя

Страница: 21 / 100

EDA51 User Guide

Battery Recommendations and Safety Protections

•

For information about battery maintenance, refer to the

Battery Maintenance

White Paper

available on

sps.honeywell.com

•

For maximum battery life, charge the battery at 20 °C (68 °F) to 25 °C (77 °F)
and store at 20 °C (68°F) with a 30%-50% charge.

•

Do not store the battery at temperatures above 60 °C (140 °F). Storage above
60 °C (140 °F) may damage the battery.

•

Charge the battery before use. Battery ships with only a partial charge.

•

See

Charge the Battery Before Use

on page 5 for approved charging methods.

Use of this battery in other devices could result in damage to the device or
battery.

•

Avoid dropping the battery or computer. If you suspect that the battery or
computer is damaged, send it to Honeywell service center for inspection.

•

Replace the battery only with another BAT-EDA50 model battery (

Battery Part

Numbers

on page 5). This battery has been tested in accordance with applicable

safety standards. Contact your Honeywell sales representative or distributor if
this battery is no longer available.

•

Discarded batteries may create a safety hazard. Before disposal, cover the
battery contacts with electrical insulating tape.

•

Do not modify the battery or attempt to insert foreign objects into it.

•

Do not solder directly to the battery contacts.

•

Do not drop the battery or apply mechanical shocks or pressure to it.

•

Do not immerse batteries into, or expose them to, water or seawater.

•

Do not incinerate, microwave, throw into a fire, or expose batteries to
temperatures above the maximum rating.

•

Do not dissemble a battery or try to open or penetrate its housing.

Enable Airplane Mode

If you do not need to connect to any WWAN networks, you can enable Airplane
mode to turn Off the radios and save battery power.

1. Swipe up from the bottom of the Home screen to access all apps.

2. Tap

Settings

Network & Internet

Caution: Improper battery replacement or incompatible device usage may

result in risk of burns, fire, explosion, or other hazard. Dispose of
lithium-ion batteries according to local regulations. Risk of fire and
burns if improperly handled. Do not open, crush, heat above 60°C
(140°F), or incinerate.

Содержание ScanPal EDA51





































































































Результаты поиска

Содержание ScanPal EDA51

Отзывы:

Похожие инструкции для ScanPal EDA51

Бренды по названию

Популярные бренды

Honeywell ScanPal EDA51, Руководство пользователя

Результаты поиска

Содержание ScanPal EDA51

Отзывы:

Похожие инструкции для ScanPal EDA51

Бренды по названию

Популярные бренды