Honeywell SC500, Руководство пользователя

Страница: 67 / 150

SC Series Instruction Manual - Model SC500 page 67
Str
ain
-G
ag
e In
pu
t C
han
ne
l
10
10.5.8
SIGNATURE MODULE
Sub-Menu
UPDATE SIG.MOD?
Menu Item Updates the information stored in the transducer’s Signature Module with any new
settings that is entered into the instrument with the SETUP menus. The settings
that will be updated are:
•
EXCITATION
•
FULL SCALE MV/V
•
FULL SCALE VALUE
•
SHUNT CAL VALUE
•
DISPLAY. UNITS
Note that changes made to the instruments display setup (such as decimal point
and count-by settings) are not updated into the
Signature Module .
Updating enters these new settings from the instrument into the Signature Mod-
ule . If you do not update the Signature Module , connect a different transducer to
the instrument and then re-connect the original transducer again, the instrument
will revert to the settings that are stored inside the
Signature Module .
The options for this menu item are:
• “
NO
” will not update the Signature Module .
• “
YES
” will display
WORKING
, update the Signature Module , then display
DONE
.
DEFAULT SIG.MOD?
Menu Item This menu item will overwrite any user settings in the Signature Module with the
original default settings. The Signature Module always maintains a copy of the
original default settings that were created at the factory.
The options for this menu item are:
• “
NO
” will not restore original default settings.
• “
YES
” will display
WORKING
, update the Signature Module , with the original factory
settings, then display
DONE
.
UPDATE DAC SETUP
Menu Item This menu item determines whether or not the
DAC. FULL SCALE
and
DAC. ZERO SCALE
settings are overwritten with information from a Signature Module when a new
transducer is detected by the instrument.
The options for this menu item are:
• “
YES
” will allow a newly detected Signature Module to update the DAC Output
settings.
• “
NO
” will not allow automatic updating of the DAC Output settings.