Honeywell Rapid Eye, Руководство по установке

Страница: 7 / 82

Rapid Eye™ Multi-Media DVR Installation Guide
Document 800-02607V3 Rev A 7
11/09
REN: 00B
This equipment uses a USOC jack: RJ11.
This equipment may not be used on telephone-company-provided coin service.
Connection to party lines is subject to state tariffs.
Industry Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de classe B est conforme à la norme NMB-003 du Canada.
NOTICE: This equipment meets telecommunications network protective, operational and
safety requirements as prescribed in the appropriate Terminal Equipment Technical
Requirements document(s). This is confirmed by marking the equipment with the Industry
Canada certification number. The Department does not guarantee the equipment will
operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. The customer should
be aware that compliance with the above conditions may not prevent degradation of
service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by
the supplier. Repair or alteration made by the user to this equipment, or equipment
malfunctions, may make the telecommunications company request the user disconnect
the equipment.
Users should ensure for their protection that the electrical ground connections of the
power utility, telephone lines and internal metallic water pipe if present, are connected
together. This precaution may be particularly important in rural areas.
Caution Users should not attempt to make such connections themselves
but should contact the appropriate electric inspection authority, or
electrician, as appropriate.
Manufacturer’s Declaration of Conformance
Honeywell Video declares that HRv16wxxyzzz Rapid Eye Multi-Media remote units are in
conformity with Council Directives:
2004/108/EC (EMC), 2006/95/EC (Product safety), and 95/5/EC (R&TTE).