Rapid Eye™ Multi-Media DVR Installation Guide
Document 800-02607V3 Rev A
21
11/09
Powering the Multi-Media DVR
Honeywell recommends that you apply power to the Multi-Media DVR through an
uninterruptible power supply (UPS). For more information, see
.
Caution
In Europe, a UPS is required to meet EN50130-4 Euro Norm.
Configuring the Multi-Media DVR
Whether you plan to operate the DVR onsite (using LocalView) or remotely (using View
software via a network connection), you need to set up LocalView.
Note
For remote operations using only dial-up, you do not need to set up
LocalView.
Next Steps
The following chapters in this guide provide detailed procedures and reference materials,
starting with
Operating the DVR Remotely
If you plan to perform a quick connection after the installation, to connect remotely to Rapid
Eye DVRs, you should refer to the
Rapid Eye™ Multi-Media Digital Video Recorder System
, and the
Rapid Eye™ Multi-Media Digital Video Recorder System
, for the necessary procedures.
Содержание Rapid Eye
