Rapid Eye Multi-Media DVR System Administrator Guide
Document 800-02953V4 Rev A
207
03/10
Figure 10-12
Alarms Are Entered into the Database after being Acknowledged
Setting an Event to Report an Alarm
1.
Start a
for the Rapid Eye site. Please wait until the
System
Operational
message appears.
2.
Depending on the type of event that you want to set, either:
•
Click the Events tab. More tabs will appear. Select a tab (Session, System, and
so on) that lists the event that is to be set as an alarm.
•
Click the Serial Devices tab. Select a device and one of its events.
•
Click the Video tab. See
, to set up motion detection.
3.
To set the event to trigger an alarm, select the Alarm checkbox next to the event, so
that it shows a checkmark. For a Customer-device event, click Update on the Serial
Devices tab after selecting an Alarm or Log checkbox.
4.
You also have the option of having the event entered into the log. To do so, select the
Log checkbox so that it shows a checkmark.
Who Can Set Alarms?
To set events as alarms and/or to be logged, two items must be included in of the user’s
account rights:
•
The Modify configuration right, and
•
Access to the site to be modified (see
Who Can Receive Alarms?
A different right is needed to use an Alarm session. A View operator needs a Multi SA to:
•
Add the Process alarms right to the operator’s user account. This enables a View
operator to receive, view, acknowledge and rearm alarms. See
•
Grant the operator(s) access to the site(s).
TM
READY
ALARM
HDD
Multi Database
An event is
captured by
a unit
Events can be set up
to trigger an alarm
Another option is to
have events silently
logged for future use
Содержание Rapid Eye
