Honeywell Rapid Eye Hybrid LT, Руководство по установке

Страница: 15 / 86

Rapid Eye™ Hybrid LT DVR Installation Guide
Document 800-07766V4 Rev A 15
01/2013
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Caution Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
FCC Part 68
This equipment complies with Part 68 of the FCC rules. You must provide this information
to the telephone company when requested:
Registration number: 1MXMM00B56MA
REN: 0.8
This equipment uses a USOC jack: RJ11.
This equipment may not be used on telephone-company-provided coin service.
Connection to party lines is subject to state tariffs.
Industry Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de classe A est conforme à la norme NMB-003 du Canada.
NOTICE: This equipment meets telecommunications network protective, operational and
safety requirements as prescribed in the appropriate Terminal Equipment Technical
Requirements document(s). This is confirmed by marking the equipment with the Industry
Canada certification number. The Department does not guarantee the equipment will
operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected
to the facilities of the local telecommunications company. The equipment must also be
installed using an acceptable method of connection. The customer should be aware that
compliance with the above conditions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be coordinated by a representative designated by the
supplier. Repair or alteration made by the user to this equipment, or equipment
malfunctions, may make the telecommunications company request the user disconnect the
equipment.
Users should ensure for their protection that the electrical ground connections of the power
utility, telephone lines and internal metallic water pipe if present, are connected together.
This precaution may be particularly important in rural areas.