2.4.3
Basic board configuration for dual LCNP4e PCUS
The following table describes the standard basic board configuration for dual LCNP4e PCUS systems.
Slot number
Slot type
Description
7
PCIe x4
6
PCIe x16
5
PCIe x8
4
PCIe x16
LCNP4e/LCNP4e2
2
PCIe x16
LCNP4e/LCNP4e2
1
PCIe x8
Matrox Extio-2 F2408
ATTENTION
When Dual LCNP4e/LCNP4e2 PCUS is selected, TPC must prompt the user to add TP-RPSF02
(Extio-2).
2.5
Memory configurations
2GB (2x1GB) is the standard installed memory. System memory can be increased up to 4.0 GB.
However, systems shipped from May 2012 onwards provide 4GB (2x2GB) RDIMM as a standard
memory configuration. It is recommended that, the memory devices must be from same supplier and
must be of same speed and technology. For the Win 10 based EPKS R510.x it is recommended to use
8GB system memory for better performances.
Model no
Description
MZ-
PCEM13
1x1GB, 1333MHZ, DDR3, 1R RDIMMs ECC memory expansion
MZ-
PCEM15
2GB, 1333MHZ, DDR3, 1R low voltage RDIMMs ECC memory expansion
(1x2GB)
Ensure that the memory devices are from the same supplier and are of the same speed and technology.
ATTENTION
Due to E5620 / X5647 processor QPI limitation the 1333MHz un-buffered DDR3 DIMM
automatically downgrades to 1066MHz.
l
Standard memory configuration for 2GB using RDIMM
l
Standard memory configuration for 4GB using 2x2GB RDIMM
2.5.1
Standard memory configuration for 2GB using RDIMM
CPU 1
- 11 -
Chapter 2 - Planning
