Honeywell PX4ie, Руководство пользователя, Страница: 92 / 108

82 PX4ie and PX6ie High Performance Printer User Guide
6. Insert most of the cleaning card under the printhead and then lower the
printhead.
7. Pull out the cleaning card and raise the printhead.
8. Wait approximately 29 seconds to allow the cleaning fluid to dissolve the
residue.
9. Repeat steps 5-7.
10. If necessary, repeat the process with a fresh cleaning card.
11. Allow the cleaned parts to dry before loading the media and ribbon.
Replace the Printhead
You need to replace the printhead periodically when it wears out due to the rapid
heating and cooling process used during printing. How often you need to replace
the printhead depends on factors such as what type of images you print, the type
of media or ribbon you use, the amount of energy to the printhead, the print speed,
and the ambient temperature of the room you print in. The firmware detects the
new printhead when you restart the printer.
1. Turn off the printer.
2. Open the front door and media cover.
2.5 cm
(1 in)