Honeywell PX4ie Скачать руководство пользователя страница 89

Страница: 89 / 108

CHAPTER

PX4ie and PX6ie High Performance Printer User Guide

MAINTENANCE

Clean the Printer

To properly maintain the printer, you should clean it regularly. You can clean these
parts of the printer:

•

The printhead

•

The media guides

•

The exterior of the printer

Follow these guidelines for cleaning the printer:

•

Always remove the power cord before cleaning.

•

Never spray the printer with water. Protect it from water when cleaning the
premises.

Clean the Exterior of the Printer

Clean the exterior of the printer as needed.

To clean the exterior of the printer:

Wipe external surfaces with a soft cloth slightly moistened with water or a mild
detergent.

Caution: To avoid possible personal injury or damage to the printer, never

insert any pointed or sharp objects into the printer.

Caution: Use only the cleaning agents specified in this section.

Honeywell is not responsible for damage caused by any other
cleaning materials used on this printer.

Caution: Isopropyl alcohol is a highly flammable, moderately toxic, and

mildly irritating substance.

Содержание PX4ie













































































































Результаты поиска

Содержание PX4ie

Отзывы:

Honeywell PX4ie, Руководство пользователя, Страница: 89 / 108

Результаты поиска

Содержание PX4ie

Отзывы: