Honeywell PX4ie Скачать руководство пользователя страница 86

Страница: 86 / 108

PX4ie and PX6ie High Performance Printer User Guide

Tap the right arrow and, when prompted, tap

Yes

to restore default settings

and reboot. A confirmation message appears.

To return to the Main Menu without restoring the default settings, select

. To

return to the Restore Defaults list without restoring any defaults, select

Cancel

Restore Defaults with a Hardware-Based Reset

Restore the printer defaults on a full touch printer by performing a hardware-based
reset.

Turn the printer off and open the media cover.

Turn the printhead lift lever counterclockwise to raise the printhead.

Turn the printer on while pressing and holding the

Feed

button.

Release the Feed button when the status bar is nearly full.

All of the settings are restored on the printer.

Turn the printhead lift lever clockwise to lower the printhead and close the
media cover.

Upgrade the Printer Firmware

Check for periodic updates to the printer firmware. The latest version of the
firmware is available from the Honeywell Technical Support Downloads portal
(

https://hsmftp.honeywell.com

). Go to

Software > Printers > Industrial.

You can upgrade the printer firmware using:

•

The printer web page

•

A USB storage device

•

PrintSet 5

Note:

After you upgrade the printer firmware, restore the default settings and calibrate the
media sensors.

Upgrade Firmware from the Printer Web Page

Start a web browser on your desktop PC.

In the address field, type the printer IP address and press

Enter

. The printer

web page appears.

Click

Login

in the upper right corner of the screen. The Login page appears.

Type your Username and Password in the text fields and click

Login

Содержание PX4ie













































































































Результаты поиска

Содержание PX4ie

Отзывы:

Honeywell PX4ie, Руководство пользователя, Страница: 86 / 108

Результаты поиска

Содержание PX4ie

Отзывы: