manualshive.com logo in svg

Honeywell PX4ie, Руководство пользователя, Страница: 76 / 108

Поделиться
Скачать
Honeywell PX4ie Скачать руководство пользователя страница 76

66

PX4ie and PX6ie High Performance Printer User Guide

Import a Configuration File from a USB Storage Device

You installed a saved .xml configuration file to a USB storage device to your printer.

Note:

If there is more than one configuration file on the USB storage device, the printer 
imports the first file found alphabetically by file name.

1.

Insert the USB storage device in the printer USB host port.

2.

From the Main Menu, select 

Tools > USB Menu > Configuration > Install 

Configuration

. The printer imports the configuration file:

•

An IPL configuration file is copied to /home/user/config/ipl.

•

All other configuration files are incorporated into the current configuration. 
When the file is successfully imported, a message appears.

3.

to close the message, press 

.

4.

From the Main Menu, select 

Tools > USB Menu > Remove USB

.

5.

Remove the USB storage device.

Export a Configuration File to a USB Storage Device

You can save an .xml configuration file to a USB storage device and install it on 
other printers.

1.

Make sure the USB storage device has a single partition and is formatted as 
FAT16 or FAT32.

2.

Insert the storage device into the printer USB host port.

3.

From the Main Menu, select 

Tools > USB Menu > Configuration > Export 

Configuration

. A list of the available files appears.

4.

Select the file to export and press 

. When the file is successfully exported, 

a message appears. 

5.

To close the message, press 

.

6.

From the Main Menu, select 

Tools > USB Menu > Remove USB

.

7.

Remove the USB storage device.

Connection

Programming Commands

Printer running 
Fingerprint

RUN “/system/usr/bin/cfg -o xmlimportset -k /home/user/profiles/
myprofile”

Printer running IPL

<STX><ESC>.x,/system/usr/bin/cfg -o xmlimportset -k /home/user/
profiles/myprofile<ETX>

Telnet connection over 
Port 23

/system/usr/bin/cfg -o xmlimportset -k /home/user/profiles/myprofile

Содержание PX4ie













































































































Отзывы:

Нет отзывов