Honeywell PM23c Скачать руководство пользователя страница 82

Страница: 82 / 164

Chapter 4 – Configure the Printer

PM23c, PM43, and PM43c Mid-Range Printer User Manual

To load a profile from the printer memory, select the profile in the

Resident

list and then click

Activate

. The profile is loaded.

To load a profile from another location:

Click

Browse

and browse to the location of the file.

Double-click the file.

Click

Upload

. The profile is uploaded to the printer.

Save a Printer Profile from the Main Menu

Use this procedure to save the current settings as a printer profile.

From the Ready screen, press the

Main Menu

button. The Main Menu

appears.

Select

Tools > Profiles

. The Profiles menu appears.

Select

Save

. The Save Profile menu appears.

Select the

Filename

text box and type a name for the profile. The

profiles can have up to sixteen characters.

Press

on the SIP to save your profile name and go back to the

Save Profile menu.

Press

and wait until

Complete

appears on the screen.

Press

to return to the Main Menu.

Содержание PM23c





































































































































































Результаты поиска

Содержание PM23c

Отзывы:

Honeywell PM23c, Руководство пользователя, Страница: 82 / 164

Результаты поиска

Содержание PM23c

Отзывы: