Honeywell PM23c Скачать руководство пользователя страница 22

Страница: 22 / 164

Chapter 1 – About the Printer

PM23c, PM43, and PM43c Mid-Range Printer User Manual

About the Main Menu

In the printer Ready screen, press

to view the Main Menu.

Press one of the buttons to select the Programs, Settings, Tools, or
Wizards menu:

•

Select

Programs

to see a list of programs installed on the printer.

This list includes utility programs provided by Intermec as part of the
printer firmware, and programs you have installed on the printer.
The

Programs

item appears in the Main Menu only if the printer is

using Fingerprint or Direct Protocol as the command language.

•

Select

Settings

to view and change printer settings.

•

Select

Tools

to print test labels, manage a connected USB storage

device, restore printer default settings, or save and load printer
profiles.

•

Select

Wizards

to see a list of wizards that help you configure printing

or communication settings, or calibrate the media sensors.

Note:

If you create menu shortcuts, the Main Menu is replaced by the

Quick Choices menu.

Note:

The printer cannot print while the Main Menu is onscreen. You

need to exit the Main Menu and return to the Ready screen to begin
printing.

Содержание PM23c





































































































































































Результаты поиска

Содержание PM23c

Отзывы:

Honeywell PM23c, Руководство пользователя, Страница: 22 / 164

Результаты поиска

Содержание PM23c

Отзывы: