800-19022
-
D
-
08/2014
Performance Series
HD251H Super High Resolution VFAI
Rugged Indoor/Outdoor Minidome Camera
Quick Installation Guide
800-19022–Rev D–08/2014
FCC Compliance Statement
Information to the user
: This equipment has been tested and found to comply with the
limits for a Class A digital device. Pursuant to part 15 of the FCC Rules, these limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
CAUTION
Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Canadian Compliance Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada.
Warranty and Service
Subject to the terms and conditions listed on the Product warranty, during the warranty
period Honeywell will repair or replace, at its sole option, free of charge, any defective
product returned prepaid.
In the event you have a problem with any Honeywell product, please call Customer Service
at 1.800.323.4576 (North America only) for assistance or to request a Return Merchandise
Authorization (RMA) number.
Be sure to have the model number, serial number, and the nature of the problem available
for the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits.
Items shipped
to Honeywell without a clearly identified Return Merchandise Authorization (RMA)
number may be refused.
Note
The manufacturer is not responsible for any damage caused by improper use of
the product or failure to follow instructions for the product.
CAUTION
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND•
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
1. Important Safety Instructions
BEFORE OPERATING OR INSTALLING THE UNIT, READ AND FOLLOW ALL
INSTRUCTIONS
.
AFTER INSTALLATION, retain the safety and operating instructions for future
reference.
1.
HEED WARNINGS
- Adhere to all warnings on the unit and in the operating
instructions.
2.
INSTALLATION
•
Install in accordance with the manufacturer’s instructions.
•
Installation and servicing should be performed only by qualified and
experienced technicians to conform to all local codes and to maintain your
warranty.
•
Any wall or ceiling mounting of the product should follow the manufacturer’s
instructions and use a mounting kit approved or recommended by the
manufacturer.
3.
POWER SOURCES
- This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power
supplied to your facility, consult your product dealer or local power company.
WARNING
This device is configured for 12 V DC or 24 V AC
operation; do NOT connect to higher voltage. Use only with
NRTL-approved class 2 power supplies.
4.
HEAT
- Situate away from items that produce heat or are heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers).
5.
MOUNTING SYSTEM
- Use only with a mounting system recommended by the
manufacturer, or sold with the product.
6.
ATTACHMENTS
- Do not use attachments not recommended by the product
manufacturer as they may result in the risk of fire, electric shock, or injury to persons.
7.
ACCESSORIES
- Only use accessories specified by the manufacturer.
8.
CLEANING
- Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
9.
SERVICING
- Do not attempt to service this unit yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
10.
REPLACEMENT PARTS
- When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result in
fire, electric shock or other hazards.
2. Precautions
Precautions for use
•
Read and keep these instructions.
•
This camera should be installed by qualified personnel only.
•
There are no user-serviceable parts inside. Do not dissemble this camera other than
to make the initial adjustments.
•
Do not touch the camera lens, dome, or bezel (front glass plate).
•
Do not drop the camera or subject it to physical shock.
•
Do not use a strong or abrasive detergent when cleaning the camera.
•
Use a UL-approved regulated 12 V DC or 24 V AC power supply.
•
Use an appropriate low voltage power cable to prevent fire or electrical shock.
•
Please ensure that your installation area can support the weight of the camera.
Operating Conditions
•
Avoid aiming the camera towards an extreme light source (for example, light fixtures)
to prevent damaging the CCD. Do not view direct sunlight with the camera.
•
Avoid operating or storing the unit in the following locations:
•
Extremely humid, dusty, hot/cold environments; extreme temperature
conditions where the operating temperature is outside the recommended
range of 14°F to 122°F (–10°C to 50°C). Be especially careful to provide
ventilation when operating under high temperatures.
•
Close to sources of powerful radio or TV transmitters.
•
Near a cooling or heating device.
•
Close to fluorescent lamps or objects reflecting light.
•
Under unstable light sources (may cause flickering).
3. Package Includes
•
HD251H camera
•
Configuration Guide
•
Quick Install Guide (this document)
•
Hardware Installation kit (including screws and an Allen key)
•
Local Video Output and power cables
4. Cable Connections
Key Features
•
1/3
ʺ
Sony 960H CCD
•
700 TV lines
•
Day/night
•
2.8 – 12 mm DC VFAI lens
•
8 Privacy Zones
•
Mirror function
•
User-friendly design for easy access
and adjustment of camera settings
•
Vandal-proof and weather-resistant
housing: IP66 rating
•
3-D axis gimbal
•
Local Video Out port for setup and
configuration
•
Backlight compensation
•
12 V DC / 24 V AC power supply
•
Quick and easy setup with 6 presets
