Press
Display
i. Repeat steps 3b-h to
program LEAVE,
RETURN and SLEEP
for the first day
j.
Copy program to rest
of the days (Hold DAY
key to display each
weekday)
k. Exit programming
mode (saves program)
4. Changing the Program
a. Enter program mode
b. Locate desired day
and period
c. Change time
d. Change temperature
e. Change fan setting
f.
Change vent setting
g. Exit program mode
69-0892—1
2
3
Quick Guide
NOTE: Press the RUN key at anytime to exit programming.
4
69-0892—1
WAKE
MON
AM
WAKE
SAT
AM
LEAVE
SAT
AM
PM
SUN
RUN
SELECT
PERIOD
DAY
SELECT
PERIOD
M6260
CHECK
SET
CLOCK
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY
VENTILATE
RUN
SYSTEM
HEAT OFF COOL
FAN
AUTO ON CIRC
DAY
TIME
TIME
SYSTEM
Press
Display
e. Set the temperature for
heating
f.
Set the temperature for
cooling
NOTE: If you lower cool temperature closer than 3°, the heat setpoint
will lower to keep the 3° differential (in AUTO).
g. Choose fan operation:
• AUTO—on
with
equipment
•
ON—fan on
continuously
• CIRCULATE—on
at
least 30% of the time
h. Choose outdoor air
ventilation (if installed)
WAKE
AUTO
FAN
HEAT
COOL SET PT
AUTO
FAN
WAKE
VENT
HEAT
COOL SET PT
HEAT
COOL SET PT
HEAT SET PT COOL
HEAT
COOL SET PT
AUTO
FAN
WAKE
HEAT
COOL SET PT
AUTO
FAN
WAKE
HEAT/COOL
SETPOINTS
HEAT/COOL
SETPOINTS
FAN
AUTO ON CIRC
VENTILATE
1. Set the Clock
Press
Display
a. Enter clock setting
mode
b. Set current day
c. Set current time
d. Exit clock setting mode
2. Starting Over
a. Optional: Clear all
programming (press
SELECT PERIOD and
hold CANCEL until
PROG CLR is
displayed)
3. Program 1st Day
a. Enter program mode
b. Select a day, start with
Monday
c. Select a period, start
with WAKE
d. Set the period starting
time
PM
MON
PM
SUN
SLEEP
SUN
PM
SUN
SLEEP
SUN
MON
SLEEP
WAKE
MON
PM
SUN
MON
AM
SET
CLOCK
DAY
TIME
TIME
RUN
SELECT
PERIOD
CANCEL
SELECT
PERIOD
DAY
SELECT
PERIOD
TIME
TIME
HEAT
COOL SET PT
PM
SUN
RUN
LEAVE
SAT
AM
TIME
TIME
HEAT
COOL SET PT
AUTO
FAN
LEAVE
VENT
VENTILATE
AUTO
FAN
LEAVE
HEAT
COOL SET PT
FAN
AUTO ON CIRC
RETURN
PM
THU
DAY