Honeywell PD45 Скачать руководство пользователя страница 63

Страница: 63 / 94

CHAPTER

PD45 User Guide

MAINTENANCE

Clean the Printer

To properly maintain the printer, you should clean it regularly. You can clean these
parts of the printer:

•

Printhead

•

Platen roller

•

Media guides

•

Media path

•

Exterior of the printer

Follow these guidelines for cleaning the printer:

•

Always remove the power cord before cleaning.

•

Never spray the printer with water. Protect it from water when cleaning the
premises.

Warning: Disconnect the power cord from the socket-outlet before

installing user-service parts in the printer.

Caution: To avoid possible personal injury or damage to the printer, never insert

any pointed or sharp objects into the printer.

Caution: Use only the cleaning agents specified in this section. Honeywell is

not responsible for damage caused by any other cleaning materials
used on this printer.

Caution: Isopropyl alcohol is a highly flammable, moderately toxic, and mildly

irritating substance.

Caution: Do not spray the printer with water. If you are using a hose to

clean the premises in an industrial environment, remove the
printer or protect it carefully from spray and moisture.

Содержание PD45































































































Результаты поиска

Содержание PD45

Отзывы:

Honeywell PD45, Руководство пользователя, Страница: 63 / 94

Результаты поиска

Содержание PD45

Отзывы: