Honeywell PD45, Руководство пользователя, Страница: 23 / 94

PD45S User Guide 13
To load media for tear off printing:
1. Open the media cover
2. Remove the media roll lever.
3. Load the media onto the media supply hub.
Note: Make sure you push the roll all the way against the inner wall of the printer.
4. Replace the media roll lever in the upright position to hold the media on the
supply hub and tighten the screw.
Warning: The tear bar contains sharp edges. Keep fingers and other body
parts away from the tear bar.
Warning: Moving parts are exposed when the cover is open. Make sure
the cover is closed before operating the printer.