Honeywell NOTIFIER NFW-50X, Руководство пользователя, Страница: 55 / 158

NFW-50X Manual — P/N LS10129-001NF-E:C 7/25/2018 55
Master Programming Level Programming
The sounder base volume has two settings: Low, or High. Press 1 while viewing Sounder Base Screen #2
until the display reads Low or High as desired. Each press of the 1 key will cause the display to toggle
between Volume Low and Volume High .
A maximum of five zones can be programmed to each sounder base. Pressing 2 while viewing Sounder
Base Screen #2 displays the following screen:
Note that Z*** represents the Zone Number(s) corresponding to this device. The factory default for an unprogrammed device is Z000 for
general alarm zone. A flashing cursor will appear on the first
0 to the left. Enter the three digit number corresponding to the zone that is
to be assigned to this sounder base. The cursor moves to the next Z*** designation. Continue entering zone assignments or the remain-
ing zones can be left blank or programmed as general alarm zone Z000. When all desired changes have been made, press the Enter key
to store the zone assignments. The display will return to the Sounder Base Screen #2. Note that the left and right arrow keys can be used
to navigate through the zones and the
CLEAR key can be used to quickly clear a zone.
Noun/Adjective
The Noun/Adjective selection allows the programmer to enter specific descriptors about the detector cur-
rently being programmed. Pressing
1 while viewing Edit Detector Screen #6 will cause the following screen
to be displayed:
Pressing 1 while viewing the Noun/Adjective Screen will cause the following screen(s) to be displayed.
Note that the keyboard down arrow key must be pressed to see all the Adjective screens. Press the number
corresponding to the adjective that is to be used as a descriptor for the location of the detector currently
being programmed. When an adjective has been selected, it will appear at the top of the display as indicated
by the asterisks.
Pressing 2 while viewing the Noun/Adjective Screen will cause the following screen(s) to be displayed.
Note that the keyboard down arrow key must be pressed to see all the Noun screens. Press the number corre-
sponding to the noun that is to be used as a descriptor for the location of the detector currently being pro-
grammed. When a noun has been selected, it will appear at the top of the display as indicated by the
asterisks.
SOUNDER BASE
1=ZONE ASSIGNMENT

2=VOLUME LOW
Sounder Base Screen #2
ZONE ASSIGNMENT
Z

Z

Z

Z

Zone Assignment Screen
!
CAUTION: VERIFY SOUNDER BASE MODEL NUMBER
USE OF THE SOUNDER BASE PROGRAMMING OPTIONS REQUIRES THE USE OF THE B200S SOUNDER BASE.
WHILE THE B200SR SOUNDER BASE IS COMPATIBLE, IT DOES NOT ALLOW FOR SPECIAL PROGRAMMING
OPTIONS. IF USING THE B200SR, SET THE SOUNDER BASE OPTION TO “NO”. IF SET TO “YES”, AN ERROR WILL
OCCUR AND THE SYSTEM WILL DISPLAY AN INVALID REPLY. CODING OPTIONS FOR THE B200SR ARE ACHIEVED
MANUALLY WITH JUMPER SETTINGS ON THE DEVICE.
EDIT DETECTOR
1=NOUN/ADJECTIVE
2=DESCRIPTION

Edit Detector Screen #6
1=STANDARD ADJECTIVE
2=STANDARD NOUN
3=CUSTOM ADJECTIVE
4=CUSTOM NOUN
Noun/Adjective Screen
1=STANDARD ADJECTIVE
2=STANDARD NOUN
3=CUSTOM ADJECTIVE
4=CUSTOM NOUN
Noun/Adjective Screen

1=NORTH
2=SOUTH
3=EAST
Adjective Screen #1

1=WEST
2=FRONT
3=CENTER
Adjective Screen #3

1=REAR
2=UPPER
3=LOWER
Adjective Screen #5

1=MAIN
2=FIRST
3=2ND
Adjective Screen #7

1=3RD
2=4TH
3=5TH
Adjective Screen #2
Adjective Screen #6

1=FLOOR1
2=FLOOR2
3=FLOOR3
Adjective Screen #4

1=FLOOR5
2=FLOOR6
3=ROOM
1=STANDARD ADJECTIVE
2=STANDARD NOUN
3=CUSTOM ADJECTIVE
4=CUSTOM NOUN
Noun/Adjective Screen