manualshive.com logo in svg

Honeywell NFS-3030, Руководство по подключению, Страница: 73 / 80

Поделиться
Скачать
Honeywell NFS-3030 Скачать руководство пользователя страница 73

Notifier SLC Wiring Manual —

 P/N 51253:U5 12/20/2017

73

Appendix E: Canadian Versions of SLC Devices

  

UL-listed SLC Device

ULC-listed SLC Device

Description

Detectors

FSP-951  

FSP-951A  

Analog, addressable intelligent smoke detector that uses a photoelectric 
sensing chamber. Listed for use in ducts. Designed to provide open area 
protection. FlashScan and CLIP mode.  White. 

FSP-951-IV 

FSP-951A-IV 

Analog, addressable intelligent smoke detector that uses a photoelectric 
sensing chamber. Listed for use in ducts. Designed to provide open area 
protection. CLIP mode only. Ivory.

FSP-951R 

FSP-951RA  

Analog, addressable intelligent photoelectric sensor with remote test 
capability. For use with DNR(W) in US; for use with DNRA in Canadian 
applications. FlashScan and CLIP mode. White.

FSP-951R-IV 

FSP-951RA-IV 

Analog, addressable intelligent photoelectric sensor with remote test 
capability. For use with DNR(W) in US; for use with DNRA in Canadian 
applications. CLIP mode only. Ivory.

FSP-951T 

FSP-951TA 

Adds thermal sensors that will alarm at a fixed temperature of 135°F (57°C). 
FlashScan and CLIP mode. White.

FSP-951T-IV 

FSP-951TA-IV 

Adds thermal sensors that will alarm at a fixed temperature of 135°F (57°C). 
Intelligent Photo/Temperature Detector. CLIP mode only. Ivory.

FST-951 

FST-951A 

High temperature sensor with 190°F (87.8°C) fixed temperature alarm. 
FlashScan and CLIP mode. White.

FST-951-IV 

FST-951A-IV 

High temperature sensor with 190°F (87.8°C) fixed temperature alarm. CLIP 
mode only. Ivory.

FST-951R 

FST-951RA 

Incorporates a thermal rate of rise of 15°F (9.4°C). FlashScan and CLIP 
mode. White.

FST-951R-IV TC808B3102-
IV

FST-951RA-IV 

Incorporates a thermal rate of rise of 15°F (9.4°C). CLIP mode only. Ivory.

FST-951H 

FST-951HA 

High temperature sensor with 190°F (87.8°C) fixed temperature alarm. 
FlashScan and CLIP mode. White.

FST-951H-IV 

FST-951HA-IV 

High temperature sensor with 190°F (87.8°C) fixed temperature alarm. CLIP 
mode only. Ivory.

FAPT-851 (Acclimate™)

FAPT-851A

Intelligent detector that combines a photoelectric sensing chamber and fixed 
temperature heat detection (135°F/57.2°C). FlashScan capable. 

FSB-200, FSB-200S

FSB-200A, FSB-200SA

Addressable, intelligent, single-ended beam smoke detector with built-in 
sensitivity testing. FlashScan and CLIP mode.

FSI-851

FSI-851A

Addressable, intelligent smoke detector that incorporates an ionization 
sensing chamber. Designed to provide open area protection. FlashScan 
capable.

FSP-851

FSP-851A

Analog, addressable intelligent smoke detector that uses a photoelectric 
sensing chamber. Listed for use in ducts. Designed to provide open area 
protection. FlashScan capable. 

FSP-851T

FSP-851TA

Adds thermal sensors that will alarm at a fixed temperature of 135°F (57°C). 

FSP-851R

FSP-851RA

Analog, addressable intelligent photoelectric sensor that is remote test 
capable. For use with DNR(W).

FST-851

FST-851A

Intelligent thermistor sensing circuit for fast response. Designed to provide 
open area protection with 50 foot spacing capability. A fixed temperature 
sensor with 135°F fixed temperature alarm. FlashScan capable. 

FST-851R

FST-851RA

Incorporates a thermal rate of rise of 15°F (9.4°C). FlashScan capable. 

FST-851H

FST-851HA

High temperature sensor with 190°F (87.8°C) fixed temperature alarm. 

FSD-751PL

FSD-751PLA

Photoelectric Duct Detector, Low-flow.

FSD-751RPL

FSD-751RPLA

Photoelectric Duct Detector, Low-flow.

FSH-751

FSH-751A

Smoke detector provides early warning smoke detection in hostile 
environments where traditional smoke detectors are not practical.

FSL-751

FSL-751A

An advanced intelligent photoelectric detector that uses a laser diode, 
special optics, and signal processing to obtain extremely high sensitivity. 

FSC-851

FSC-851A

Intelligent multi-criteria detector that combines photoelectric sensing, heat 
detection, carbon monoxide and flame.

FCO-851

FCO-851A

Addressable, intelligent detector that combines a photoelectric sensing 
chamber combined with Carbon Monoxide (CO) sensors. FlashScan mode 
only.

Содержание NFS-3030

















































































Отзывы:

Нет отзывов