Honeywell N86 Series, Руководство пользователя

Страница: 55 / 218

3 - 17
for each read. The engine attempts to find and decode new symbols as long as
the trigger is pulled. When this programming selection is turned
Off , the engine
will only read the symbol closest to the center of the image.
Default = Off.
No Read
With No Read turned On , the engine notifies you if a code cannot be read. If
using an EZConfig Tool Scan Data Window (see page 9-3 ), an “NR” appears
when a code cannot be read. If No Read is turned Off , the “NR” will not appear.
Default = Off.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,”
you can edit the output message (see
Data Formatting beginning on page 5-1).
The hex code for the No Read symbol is 9C.
On
* Off
On
* Off