Honeywell MX8, Справочное руководство

Страница: 215 / 318

Chapter 6: Launch Utility
Introduction
The launch utility on the MX8 has two functions:
l
Process registry based Launch items
l
Process script based Launch items .
Registry Based Launch Items
Note: The Registry based Launch items (documented here) are processed before the Script Based Launch items.
The Launch utility can use registry entries to auto-launch Windows CAB files. These CAB files exist as separate files from the
main installation image, and are copied to the terminal using ActiveSync, or using the optional SD card. The CAB files are
copied into the folder System, which is the internal Flash drive. Then, information is added to the registry, if desired, to make
the CAB file auto-launch at startup.
The registry information needed is under the key
HKEY_LOCAL_MACHINE\SOFTWARE\LXE\Persist
The main subkey is any text, and is a description of the file. Then the values are added:
Value Need
Data
Type
Description
FileName
Required
String Name of the CAB file, with full path (usually \System)
Installed
Required DWORD
Starts as 0, changed to 1 when the CAB file is installed
FileCheck Required
String
File name, with full path, of a file installed by the CAB file. If this file is not found, Launch
assumes the CAB file is not installed or memory was lost.
Order Optional
DWORD
Determines sequence of installation. Order=0 is installed first, order=99 is installed last.
Delay Optional
DWORD Delay, in seconds, after this item is installed and before the next one is installed. If the
install fails (or is not found) the delay does not occur.
PCMCIA Optional
DWORD
1=power up PCMCIA/CF slot after installation
6-1