Honeywell MS4980 Скачать руководство пользователя страница 34

Страница: 34 / 52

Upgrading the Firmware

The MS4980 scanner is part of Honeywell’s line of scanners with flash

upgradeable firmware. The upgrade process requires a new firmware file

supplied to the customer by a customer service representative and the

MetroSet2 software



. A personal computer running Windows 95 or greater with

an available RS232 serial or USB port is required to complete the upgrade.

Note:

Do not use the standard cable supplied with Keyboard Wedge MS4980

interface kits for firmware upgrades. If using USB or RS232 for the

upgrade process, the standard USB or RS232 cable provided with the

scanner can be used.

To upgrade the firmware in the MS4980:

1. For USB: Plug the scanner into a USB port on the host system.

For RS232: Plug the scanner into a serial communication port on the host

system.

2. Start the MetroSet

software

3. Click on the plus sign (+) next to

POS Scanners

to expand the supported

scanner list.

4. Choose the MS4980 from the list.
5. Click on the

Configure xxx/4980 Scanner

button.

6. For USB: Select the USB interface.

For RS232: Select the RS232 interface.

7. Choose

Flash Utility

from the options list located on the left side of the

screen.

8. Click on the

Open File

button in the Flash Utility window.

9. Locate and open the flash upgrade file.
10. For RS232 Only: Select the COM port the scanner is connected to on the

host system.

11. Verify the settings listed in the Flash Utility window.
12. Click on the

Flash Scanner

button to begin the flash upgrade.

13. A message will appear on the screen when the upgrade is complete.



MetroSet2 is available for download, at no additional cost, from

www.honeywellaidc.com.

Содержание MS4980





















































Результаты поиска

Содержание MS4980

Отзывы:

Похожие инструкции для MS4980

Бренды по названию

Популярные бренды

Honeywell MS4980, Инструкция по установке и эксплуатации

Результаты поиска

Содержание MS4980

Отзывы:

Похожие инструкции для MS4980

Бренды по названию

Популярные бренды