LED OUTDOOR WALL LANTERN
MODEL: ML03XX-XXXX
USE AND CARE GUIDE
TROUBLE SHOOTING
FCC WARNING:
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
**********************************************************************************************
NOTES:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
International Development, LLC.
899 Henrietta Creek Rd. Roanoke, TX 76262 USA
Toll-free: 1-877-723-0723
© 2016 IDC, all rights reserved.
The Honeywell Trademark is used under license from Honeywell International Inc.
Honeywell International Inc. makes no representations or warranties with respect to this product.
This product is manufactured for International Development, LLC.
PROBLEM
Light will not come on.
A. Light switch is turned off.
B. Fuse is blown or circuit breaker
is turned off.
C. Incorrect circuit wiring.
A. Turn light switch on.
B. Replace fuse or turn circuit
breaker on.
C. Verify that fixture is wired properly.
POSSIBLE CAUSE
SOLUTION
Lights come on during
the day.
A. Photocell covered.
A. Clean photocell with damp cloth.
17”
11”
Fold
Fold
Fold
Fold
