Document 800-08807V3 – Rev A – 03/2012
MAXPRO
®
NVR XE
(Xpress Edition)
Entry Level Network Video Recorder
Quick Install Guide
Document 800-08807V3 – Rev A – 03/2012
Note
More detailed information on the advanced features available in MAXPRO NVR XE, can
be found in the comprehensive guides available on your software/documentation DVD
- UserManuals folder.
Configurator Tab
Use the
Configurator
tab to configure video devices and set up your MAXPRO NVR XE system.
The Configurator tab consists of seven sub-tabs: System, Disk, Camera, Schedule, I/O,
Sequence, User.
Search Tab
Use the
Search
tab to search for recorded video (clips) or events.
1.
Select the check box next to the camera(s) from which the video was recorded.
2.
Select search conditions in the Date time filter, then click
Search
.
Configurator
tab sub-tabs:
System
: Recording, email, holiday/exceptions for
schedules.
Disk
: Hard drive storage capacity, partitioned.
C: reserved for operating system
D: where the data is stored
Camera
: Discover and add network cameras, live camera
configuration, recording, video motion detection.
Schedule
: Set recording schedules for recorded video.
I/O
: Configure input and output for each camera.
Sequence
: Select a sequence of cameras for live video.
User
: Set user access and permission levels.
Hardware Installation
Honeywell IP Camera Configuration
Live View
Third Party Device Configuration
Advanced Features
Introduction
Non-Honeywell devices are configured using MAXPRO NVR. To set up cameras for video
input:
1.
Launch MAXPRO NVR.
2.
On the
Configurator
tab, click the
Camera
tab.
3.
In the
Discover cameras here
area, click
to discover the connected cameras in the
subnet.
4.
Click
to add the device to the Camera list. Ensure that it is
Enabled
.
5.
To change the default parameters of a camera, select it and then click
next to
Advanced Discovery Settings
to open an advanced settings pane where you can
modify the settings as required.
6.
Click
Save
for your new settings to take effect.
More Information
For more detailed information than is contained in this guide, please refer to the appropriate
user guide located on the software/documentation DVD or on the Honeywell product web site
at
.
For a comprehensive list of all the third party devices supported by MAXPRO NVR, please go
to Honeywell Open Technology Alliance (HOTA) at
www.security.honeywell.com/hota/
.
+1.800.796.CCTV (North America only)
Document 800-08807V3 – Rev A – 03/2012
© 2012 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any
means without written permission from Honeywell. The information in this publication is believed to be
accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting
from the use thereof. The information contained herein is subject to change without notice. Revisions or new
editions to this publication may be issued to incorporate such changes.
Thank you for purchasing a Honeywell MAXPRO
®
NVR XE. Before installing your NVR,
please read this guide carefully.
Unpack Everything
Check that the items received match those listed on the order form and packing slip. The
packing box should include
:
Note
Other peripheral hardware (owner supplied) will also be needed for your installation
(for example, Honeywell IP cameras, a PoE switch, a VGA monitor, and appropriate cabling).
See
, for more information.
Entry Level Network Video Rec
order
Ctrl
Alt
Caps Lock
Tab
Z
X
C
V
B
M
N
Shift
Ctrl
Shift
<
,
>
.
?
/
A
S
D
F
G
J
H
K
L
:
;
Enter
Q
W
R
R
T
U
Y
P
I
O
{
[
}
]
|
\
&
^
_
-
+
=
@
2
!
1
#
3
$
4
%
5
6
7
*
8
(
9
)
0
Backspace
~
`
F1
F2
F3
F4
Esc
F5
F6
F7
F8
F9
F10
F11
F12
Scroll
Lock
Pause
Break
PrtScn
SysRq
Num
Lock
Caps
Lock
Scroll
Lock
Insert
Home
Delete
End
Page
Up
Page
Down
Num
Lock
/
*
_
7
Home
8
9
PgUp
4
5
6
+
1
End
2
3
PgDn
0
Ins
.
Del
Enter
M A X P R O
® N V R X E
Software and Documentation
H o n e y w e ll C o n fid e n tia l
& P ro p r ie ta ry
S o ftw a re Versio n 1 B uild 14
C opy right 2011
H oneywell International Inc.
All rights reserved.
100-03255RevA
M A X P R O
® N V R X E
Recovery Image - Disk 2
H o n e y w ell C o n fid e n tia l
& Pr o p r ie ta ry
S o ftw a re Versio n 1 B uild 14
C opyrig ht 2011
H oney well International Inc.
All rights reserved.
100-03255RevA
This recovery DVD includ es
TeraBy te, Inc. sof tware and its
use is s ubject to TeraBy te,
Inc.’s end us er licens e.
M A X P R O
® N V R XE
Recovery Image - Disk 1
Ho n e y w e ll C o n fid e n tia l
& P ro p rie ta r y
So ftw a re Versio n 1 B u ild 14
C opy right 2011
H oneywell International Inc.
All rights res erved.
100-03255 Rev A
This recovery DV D includes
TeraB yte, Inc. so ftware and its
use is subject to TeraB yte,
Inc.’s end user license.
USB mouse
USB keyboard
MAXPRO NVR XE software/
documentation DVD,
Recovery Disk DVD(s)
This guide
Power cable
(not shown)
Third Party Device Configuration
1
2
3
4
4
Advanced Features
5
5
