background image

I N T R O D U C T I O N   T O   M A X P R O   N V R

MAXPRO NVR Features

40

 MAXPRO NVR 5.0 Installation and Configuration Guide

1

3 D   P o s i t i o n i n g

3D Positioning feature enables you to view a specific object in a live video in 3-dimensional 
view. On a live video you need to draw a region to view a specific object. This feature is 
supported only with New EquIP PTZ (HDZ302DE, HDZ302D, HDZ302DIN) camera models.

N e w   E q u I P   C a m e r a   M o d e l   D e w a r p i ng

New EquIP FishEye Camera (HFD6GR1) is capable of delivering FishEye view of the 
surrounding and which can also be Dewarped to different view types depending on the 
mounting position. 

H. 2 6 5   Co d e c  S u p p o r t

H265 codec type is now supported to optimize the storage requirements for higher solution 
cameras. H265 is only supported for New EquIP model cameras (HFD6GR1, HSW2G1, 
HCD8G, HBD8GR1, H4D8GR1, HDZ302DE, HDZ302D and HDZ302DIN). H.265 cameras 
supports GPU based Rendering. Now you can render upto 23 H.265 cameras with 1080P 
Resolution at 30 FPS/30 GOP.

Limitations of H.265 Codec Type:

H.265 is not supported in MAXPRO Mobile app

H.265 is not supported in Web client

M e t a  D a t a   C o n v e r s i o n  U t i l i t y

Meta data conversion utility allows you to replace or update the unique system ID number of 
the recorded clips and Meta data details for all or specific cameras. This utility helps you to 
retain your recorded clips and Meta data details during Failover /Failback operations. This 
allows a user to effectively playback the recorded clip without loss of video. 

M u l t i - l a n g u a g e   S u p p o r t

MAXPRO NVR supports multiple languages such as English, French, Arabic, Russian, 
Spanish, Italian, Dutch, German, Czechoslovakian, Portuguese and Polish. English is the 
default language.

K e y b o a r d  S u p p o r t

MAXPRO NVR supports industry standard Honeywell keyboards connected over Ethernet 
such as UltraKey Plus and UltraKey Lite

Cl i p  Ex p o r t

MAXPRO NVR supports exporting clips with audio in - WMV, ASF and Honeywell MPVC 
formats. It also supports exporting still images/snapshots in .BMP format. The clips can be 
signed with digital signatures to ensure authenticity. 

MAX P R O   N V R   C l i p   P l a ye r

MAXPRO NVR Clip Player is a Honeywell proprietary clip player designed to only playback 
exported MAXPRO Video Container format (MPVC) clips. This clip player is part of the NVR 4.0 
package and can be accessed in the NVR installation folder.

Ema i l   N o t i f i c a t i o n

MAXPRO NVR supports email notification on camera, system and operator events.

Содержание MAXPRO NVR Hybrid PE









































































































































































































































































































































































Отзывы: