C O N F I G U R I N G M A X P R O N V R
Performing User Administration
180
MAXPRO NVR 5.0 Installation and Configuration Guide
6
privilege can add new users, assign roles to the added users, add or modify the privileges to
the users, and perform various configurations in MAXPRO NVR.
Adding a User
You can add a user by providing a unique user name and a password. Only the “NVR
Administrator role” user can add a new user in MAXPRO NVR. You can add up to 1024 users
in MAXPRO NVR. After you add a new user, you can assign a role to it.
To add a user
1.
Click the
Configurator
tab. The
System
page displays by default.
2.
Click the
User
tab to navigate to the
User
page
.
Figure 6-47 User page
3.
Click
Add
. A new row is created with a default set of values for the user.
4.
Under the
User Name
column, the default user name is displayed. You can type a new
user name as applicable.
5.
Under the
Domain
column, type the Windows domain name if the user is a Window's user
and is part of a Window's domain network.
6.
Under the
User Description
column, type a description for the user.
7.
Under the
Role
column, select the role you want to assign to the user from the drop-down
list.
8.
Under the
Password
column, type the user's password.
Note:
Minimum length of the password is 6 characters. While adding a User, if the
password of other users added before 3.1 release is less than 6 characters then
an error message is displayed and all passwords need to be updated to meet the
minimum requirement.
9.
Under the
IsWindowsUser
column, select the check box if the user is a Window's user.
Содержание MAXPRO NVR Hybrid PE
