C O N F I G U R I N G M A X P R O N V R
Configuring the Cameras
140
MAXPRO NVR 5.0 Installation and Configuration Guide
6
Figure 6-16 Camera Type field displaying “ONVIF DEVICE” for a ONVIF camera
You must add the discovered camera(s) using the
Add Cameras
button to view the model
name(s). After adding the camera(s), you can view the model name(s) from the
Camera Type
drop-down list in the left pane of the
Camera
page.
AXIS and ONVIF cameras also support the TCP and UDP based streaming modes. You can
choose the required streaming mode during the configuration depending upon what camera
supports.
Tip:
To discover and configure the AXIS Camera/Encoders as an ONVIF device in MAXPRO
MAXPRO®NVRs - AXIS Camera/Encoders Discovery and
.
To add third party ONVIF cameras in MAXPRO NVR through Auto Discovery
1.
In the
Camera
page, click the
Auto Discovery
button. After the discovery select the
required check boxes of third party ONVIF cameras.
2.
Under
Settings
, select the
Video Format
from the drop-down list.
3.
Under
Set camera credentials,
type the
User Name
and
Password
of the third party
ONVIF camera.
4.
Click
Save
.
5.
Click the
Add Cameras button
to add the camera.
Tip:
After adding a third party ONVIF camera model using Auto Discovery, you can also
manually add a new third party ONVIF camera. Click the
Manual Add
button located at the
bottom of the
Camera
page and then select the model from the
Camera
Type
drop-down list.
Adding ONVIF devices manually when Auto discovery is not supported
MAXPRO NVR v3.5 or later supports manual addition of ONVIF cameras and encoders with
the support of additional device types - ONVIF DEVICE (for cameras) and ONVIF ENCODER
DEVICE (for encoders).
To manually add ONVIF devices in MAXPRO NVR when Auto Discovery is not supported
Содержание MAXPRO NVR Hybrid PE
