Honeywell INTEVIO, Руководство пользователя

Страница: 26 / 133

18
Rear Panel
No. Parts/Ports Description
1 MIC volume To adjust the volume of the microphone.
2 Line volume To adjust the volume of the line input.
3 Loudspeaker volume To adjust the volume of the loudspeaker.
4 Line input
This port can be connected to an external audio device, such as
a CD/DVD player, tuner, etc.
5 Debug interface To upgrade the firmware.
6 Address
The DIP switch is used to set the address of remote call
stations for communication, which ranges from 1 to 6. This
device has a built-in 120

resistor for the CAN bus, the 4th
switch is to set the end resistor. Only the end device on the bus
can be set to connect to the end resistor.
7 Up link To connect to the RK-MCU or previous remote call station.
8 Down link To connect to the next remote call station.
9 Power adapter interface
It is used to supply the power by connecting to an external
power adapter in case
the device can’t be powered by RK-
MCU.
Technical Specifications
Parameters Values
Power supply 24V DC
Power consumption 10 W
Microphone
Sensitivity -50dB±3dB
SNR

60dB, A-weighted
Optimal pickup distance 10
～
20cm
Line Input
Input signal 1V(0dBV)
Input impedance
10 KΩ
Frequency response 80Hz-18kHz, ±3dB
SNR >85dB, A-weighted
THD <0.1%
Others
Built-in loudspeaker
2W/8Ω
Working Conditions