Honeywell IF2, Руководство пользователя

Страница: 30 / 76

20 IF2 Network Reader User Guide
Change the Default Login
If you are not using a password server to authorize user logins, Honeywell recom-
mends that you change the default user name and password and create a read-
only password.
1. From the main menu, click Security > Passwords . The Passwords screen
appears.
2. Make sure the Enable RADIUS check box is not checked. Clear this check box if
necessary and then click Activate Changes .
3. Configure the parameters. For help, see the next table.
4. Click Activate Changes to save your changes and immediately make them
active.
Password Parameter Descriptions
Parameter Description
Username Enter the user name you need to use to log in to this IF2. The user name
can be from 1 to 32 characters long. You must always specify a user
name. Default is
intermec
.
Password Enter the password you need to use to log in to this IF2. This password
gives you read and write access to the IF2 configuration. The password
can be from 8 to 32 characters long. You must always specify a password.
Default is
intermec
.
Read-only Password Enter the password you need to use to log in to this IF2. This password
gives the user read-only access to the IF2. This user can view the
configuration and execute diagnostics but cannot perform any tasks that
affect IF2 operation, such as changing configuration options or
upgrading firmware. Default is
readonly
.
The read-only password cannot be deleted. To disallow read-only access,
you need to enable RADIUS authentication. For help, see
"Configure
Security" on page 16 .