Honeywell HX3 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 230

Honeywell HX3 Скачать руководство пользователя страница 65

5 - 25

Appearance

There is very little change from general desktop PC Appearance options. Select a scheme from the dropdown list and
make changes to the parameters. The default is High Contrast White for monochrome displays and Windows Stan-
dard for color displays. Tap the Save button to save any changes, renaming the scheme if desired. Tap the Delete but-
ton to delete schemes. Tap the Apply button to apply the selected scheme to the display.

Backlight

The backlight settings use the default timeouts and is synchronized to the User Idle setting in the Schemes tab in the
Power control panel.

When the backlight timer expires, the touch screen backlight is dimmed, not turned off. When both checkboxes are
unchecked, the backlight never turns off (or dims).

Default values are disabled for battery and external power. By default the backlight is always on.

«
...
63
64
65
66
67
...
»

Содержание HX3







































































































































































































































Отзывы:

Нет отзывов