Honeywell HX3 Скачать руководство пользователя страница 217 | Manualshive

Страница: 217 / 230

Honeywell HX3 Скачать руководство пользователя страница 217

12 - 9

Battery Charger Help

The following is intended as an aid in determining whether the battery pack or the charger may be malfunctioning:

Issue

Cause

Solution

Battery pack does not fit in
charging pocket.

Different manufacturer's battery
pack, or there is an object in the
charging pocket.

Check if the HX3 battery pack has Honeywell part
number HX2A301BATTSTD /160289-0001 or
HX2A302BATTEXT/160320-0001 on the label. If
not, do not use.
Remove the object from the charging pocket.

No battery pack in charger, but
any of the LEDs are on.

Dirt or foreign objects are in the
charging pocket.

Unplug charger from AC supply. Remove any dirt or
foreign objects from the charging pocket. If the LEDs
continue to remain ON, the charger may be
defective. Return charger to an authorized
Honeywell service center.

Charger is plugged into a live
outlet, battery pack is inserted,
but RED LED is OFF and no
other LEDs are on, or all LEDs
are off.

Battery pack is not making
contact with battery charge
terminals in the charging pocket.

Push battery pack in firmly. Do not “slam” the battery
pack into the charging pocket.

Charger is plugged into a live
outlet, battery pack is inserted,
but RED LED is OFF and no
other LEDs are on, or all LEDs
are off.

Faulty battery pack.

Replace battery pack.

Charger is plugged into a live
outlet, battery pack is inserted,
but RED LED is OFF and no
other LEDs are on, or all LEDs
are off.

New battery pack, same result.

Contact

Customer Support

(page 14-1) for

replacement options.

When you first put a fully
charged battery pack in the
charging pocket, the RED LED
comes on, indicating the
battery pack is charging.

During the first few minutes, the
battery charger checks the
battery pack for correct voltage
and charge state. During this
time the LED is RED and is
continuously ON. After charging
is complete, the LED is GREEN.

There is nothing wrong with the battery pack or
charger.
Do not “top off” a fully charged battery pack by
repeatedly placing it in the charging pocket. The
battery pack may overheat and be damaged.

LED is flashing RED at any
pocket.

Current could not be sourced
through the battery pack due to
age, exhaustion or damage to the
cell(s). The battery pack does
not communicate with the
charger.

Contact

Customer Support

(page 14-1) for battery

pack replacement options.

LED is flashing RED at any
pocket.

The charger’s timeout period has
expired.

Make sure that the battery pack temperature is within
specification and retry charging. Contact

(page 14-1) if problem repeats, for battery

pack replacement options.

LED is flashing RED at any
pocket.

The battery pack voltage has not
reached 6.0V within 30 minutes
and the charger has timed out.

C ustomer Support

(page 14-1) for battery

pack replacement options.

«
...
215
216
217
218
219
...
»

Содержание HX3







































































































































































































































Отзывы:

Нет отзывов