Honeywell HX3 Скачать руководство пользователя страница 139

Страница: 139 / 230

8 - 11

• Debug - The most detailed log file.

Display Level

Use this option to control the level of detail shown on the main Enabler screen. The default is Basic Output.

• Basic Output - General information is displayed.

• Critical - Critical errors are displayed in addition to those above.

• Error - Communication or configuration problems are displayed in addition to those above.

• Warning - Possible operation problems are displayed in addition to those above.

• Info - Operational information is displayed in addition to those above.

• Debug - The most detailed list is displayed.

Display

The user interface for the Enabler can be configured to dynamically change based on the status of the HX3 connection
with the Mobile Device Server.

At startup

Default is Half Screen. Options are Half screen, Hidden or Full screen.

On connect

Default is As Is. Options are As is, Half screen, or Full screen.

Normal

Default is As Is. Options are Half screen, Hidden or As Is.

Содержание HX3







































































































































































































































Результаты поиска

Содержание HX3

Отзывы:

Honeywell HX3, Руководство пользователя, Страница: 139 / 230

Результаты поиска

Содержание HX3

Отзывы: