Honeywell HX3, Руководство пользователя, Страница: 133 / 230

8 - 5
Some parameters and features described in this section may not be available if you are not running the latest version of the
Enabler. Contact
Customer Support (page 14-1) for upgrades.
File Menu Options
Avalanche Update using File > Settings
Use these menu options to setup the Avalanche Enabler on the HX3. Change the settings and save them by rebooting
before connecting to the network.
Alternatively, the Mobile Device Server can be disabled until needed (refer to the Wavelink Avalanche Mobility Center
User’s Guide for details).
Connect
The Connect option under the File menu allows the user to initiate a manual connection to the Mobile
Device Server. The connection methods, by default, are wireless and COM connections. Any updates
available will be applied to the HX3 immediately upon a successful connection.
Scan Config
The Scan Configuration feature is not supported. The Scan Config option under the File menu allows
the user to configure Enabler settings using a special bar code that can be created using the Avalanche
MC Console utilities. Refer to the Wavelink Avalanche Mobility Center User Guide for details.
Settings
The Settings option under the File menu allows the HX3 user to access the control panel to locally
configure the Enabler settings. The Enabler control panel is, by default, password protected.
The default Settings password is system . The password is not case-sensitive.