Honeywell HTRD400, Справочное руководство, Страница: 53 / 176

HTRD400 System Reference Guide
Rev 1.02 39 Document 900.0328
05/05
Configure
Wizard … Starts the HTRD400 System Setup Wizard that assists you to configure:
• Connected HTRD400 Recorder
• Triggers
• Connected HTCD50 Digital Camera(s)
• GPS system
• Record rules, including record schedules
Recorder … Opens the Recorder Settings dialog box where you can:
• Name the recorder
• Set the record delay
• Set the standby delay
• Set the recording mode
• See the hard drive capacity
• See the percentage of free space currently available on the hard drive
Triggers … Opens the Triggers Summary window where you can edit the trigger settings,
including:
• Enable up to eight triggers
• Specify the polarity
• Enable wakeup
• Rename triggers
• Determine current trigger status
Cameras … Opens the Camera Summary window where you can add, edit, or remove a
connected camera, including:
• Name the camera
• Enable audio, if supported
• Confirm aim, focus, coverage, and audio
Coverage … Opens the Camera Coverage screen where you can test the coverage of all
connected cameras. You can also save a still image (.jpg format) of the
camera(s) as they appear on the screen.
Note This button is grayed out when you are not connected to a recorder.
GPS … Opens the GPS Summary window where you enable GPS recording, if
supported.
Rules … Opens the Rule Summary window where you can add, edit, or remove record
rules. These rules determine the conditions under which the HTRD400 Recorder
will start and stop recording. You can:
• Assign a name, description, and enable a rule
• Add an enabled trigger
• Set a record schedule
• Add a camera and set image quality, resolution, and bandwidth usage
• Assign priority to the rule
Note You must have at least one camera added before you can configure a
record rule.
Help
Contents … On-line Help is your first point of reference when configuring and operating your
HTRD400 System. You may find it helpful when resolving system configuration
queries.
Table 5-2 Toolbox Main Menu Elements
Desktop element (cont’d) Description