manualshive.com logo in svg

Honeywell HRXDS16, Руководство пользователя, Страница: 47 / 172

Поделиться
Скачать
Honeywell HRXDS16 Скачать руководство пользователя страница 47

Document 800-04559

 

Rev D

47

11/09

Configuration

Note

Even after changing the DVR settings by importing saved 
settings, the time-related settings (Date/Time, Time Zone and 
Daylight Saving Time) will NOT be changed.

Note

Do NOT set Include Network Setup to On when the network 
settings of the setup file are used in another DVR. Otherwise, the 
connection to the DVR might not be made properly.

Caution

The USB device must be FAT16 or FAT32 format.

Displaying the System Log

To display the system log:

1.

Highlight Show System Log…, then press 

#

 to display the System Log screen.

Figure 3-10

System Log Screen

The System Log screen lists system activities (up to 5,000 from the latest) that 
have occurred along with the time and date. The 

 icon displays in the last 

column for system activities of the remote site. 

2.

You can scroll through the log pages by using the Up and Down arrows, or you 
can go directly to a log page by entering the log page number in the box at the 
bottom left of the screen. 

3.

Highlight Close, then press 

#

 to exit the screen.

Содержание HRXDS16













































































































































































Отзывы:

Нет отзывов