Honeywell HRXDS16, Руководство пользователя

Страница: 101 / 172

Document 800-04559 Rev D 101
11/09
Configuration
9. To save your System Event changes, highlight Save, then press
#
.
Select Cancel to exit the screen without saving the changes.
Event Status Screen
1. In the Event menu (see Figure 3-54 ), highlight Event Status, then press
#
. The
Event Status screen appears.
Figure 3-78 Event Status Screen
The Event Status screen displays the status of the DVR's systems and inputs.
Events will be highlighted, and related channels or events will flicker for five
seconds when detected.
2. Highlight the Storage tab to display the hard disk drive status. See Storage
Screen section for more details.
Event status Is highlighted …
Alarm-In, Motion,
Video Loss,
Text-In When each event is detected based on the settings you
made in the Alarm-In, Motion Detection and Text-In setup
screen on the Event menu.
Check Alarm-In,
Check Recording When each event is detected based on the settings you
made in the System Event setup screen on the Event menu.
Panic Record While the DVR is in the panic recording mode.
Disk Almost Full When the DVR is not in the Recycle mode and the level of
disk usage reaches the Disk Almost Full percentage you
made in the System Event setup screen on the Event menu.
Disk Full will be highlighted when the DVR is not in the
Recycle mode and all available storage space has been
used.