Honeywell HRSD40F, Руководство пользователя

Страница: 83 / 168

Document 800-03097 Rev C 83
03/09
Configuration
Figure 3-51 Alarm-In Notify
5. Toggle the entire list On and Off by highlighting Notification and pressing .
Toggle the individual items On and Off by highlighting that item and pressing
. Highlight OK and press to accept your changes.
Note For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RAS (Remote Administration System).
6. Highlight a field under the PTZ heading, and press . A list of PTZ presets
appears. Select the preset position for each PTZ camera, which is where you want
PTZ cameras to move to whenever the DVR detects an input on the associated
alarm input.
7. Save your Alarm-In changes by highlighting Save and pressing . Select
Cancel to exit the screen without saving the changes.
Configuring for Motion Detection
Your DVR has built-in video motion detection. For each camera, you can:
•
Turn motion detection On and Off
• Set the sensitivity level from 1 (least sensitive) to 5 (most sensitive)
• Select the image area to be monitored for motion detection
Highlight Motion Detection in the Event menu and press . The Motion Detection
setup screen appears.