Honeywell HRSD40F, Руководство пользователя

Страница: 38 / 168

38
HRSD40F DVR User Guide
If the System ID is set from 1 to 4 , you must to press ID on the remote control and
number button (1 to 4) to control that DVR.
If you set the Unit ID of two or more DVRs to 0 , you can control those DVRs with the
infrared remote control at the same time.
Note The functions of the infrared remote control buttons are identical
to the functions of the front panel buttons.
Turning On the Power
Connecting the power cord to the DVR turns on the unit. The unit takes approximately
60 seconds to initialize.
Initial Unit Setup
Before using your DVR for the first time, you need to establish the initial settings. This
includes items such as:
•
Time and date (see Setting Up the Date and Time on page 46 )
• Display language (see Changing the Language Setting on page 42 )
• Camera (see Configuring Devices on page 66 )
• Audio (see Configuring Audio Recording on page 69 )
• Remote control (see Connecting the Infrared Remote Control on page 37 )
• Record mode (see Configuring Recording Settings on page 74 )
• Network (see Setting Up the DVR Network Connections on page 55 )
• Password (see Adding a User on page 53 and Setting up Notifications on page
63 .)
You can set up these items using various screens and dialog boxes.