Honeywell HRSD40F, Руководство пользователя

Страница: 100 / 168

100
HRSD40F DVR User Guide
Figure 3-69 Storage Screen
2. Highlight the field beside Disk Bad Notify , then press . Select the percentage
level of bad disk sectors at which you want the DVR to trigger an alert. The
available percentage levels range from
10%
to
90%
.
3. Highlight the field beside Disk Almost Full Notify , then press Select the
percentage level of disk usage at which you want the DVR to trigger an alert. The
available percentage levels range from 80% to 99%.
4. Highlight the first field beside Disk S.M.A.R.T. , and press . Use the Up and
Down arrow buttons to scroll through the numbers. Refer to the hard disk drive
manufacturer's documentation for the correct temperature setting. If the
temperature of the hard disk drive exceeds the defined threshold, the system
triggers an alert.
5. Highlight the second field beside Disk S.M.A.R.T. , and press . Select either
ºC
(Celsius) or
ºF
(Fahrenheit), and press .
6. Select Save , and press to accept the changes. Select Cancel to exit the
screen without saving the changes.
Configuring the DVR to React to System Events
System events can activate the Alarm-Out connector, sound the DVR's internal buzzer,
and/or notify a number of different devices.
1. Highlight the
Actions tab and the System Event Actions screen displays.