Honeywell HRSD16, Руководство пользователя

Страница: 93 / 176

Configuration
Document 800-03650 Rev D 93
02/09
Setting Alarm-Out Actions
You can associate Alarm-Outs with a selected camera. When the DVR detects video
loss on the selected camera, it triggers output signals on the associated Alarm-Out
connectors. You can also have the DVR internal buzzer sound if video is lost on the
selected camera.
1. Highlight the desired field under the Alarm-Out heading, and press . A list of
Alarm Outputs appears.
2. Select the Alarm Output connectors that you would like to activate whenever the
DVR detects video loss on the selected camera.
3. Select OK and press to accept the changes.
Note For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
Setting Video Loss Notifications
1. Highlight the desired field under the Notify heading, and press . The Video
Loss Notify menu appears.
Figure 3-66 Video Loss Notify Menu
2. You can toggle the entire list On and Off by highlighting Notification and
pressing .
You can toggle the individual items On and Off by highlighting them and pressing
.
3. Highlight OK and press to accept your changes.