Honeywell HRHT4041, Руководство пользователя

Страница: 54 / 174

Performance Series HQA Digital Video Recorder Local User Guide
42
5. Click or drag the mouse in the scheduling table to set the recording period. To erase a
recording period, click the eraser icon at the right of the table. Alternatively, for the day of
the week that you want to configure, click the gear icon at the right of the table. In the
Period window, set up to six recording periods. To copy the settings to additional days,
select the appropriate check box(es) under Copy, and then click Save .
6. Click Apply to save your settings.
7. To copy the record schedule settings to additional channels, click Copy , select the
channels that you want to copy the settings to, and then click OK .
To configure snapshot recording settings
1. Go to Main Menu  Setting  Camera  Encode  Snapshot .
Figure 4-4
2. On the Snapshot tab, configure the following settings:
•
Manual Snap Select the number of snapshots to take at a time.
•
Channel Select the channel that you want to configure the settings for.
•
Mode Select Timing to take snapshots according to a schedule. Select
Trigger to take snapshots when a motion detection, video loss, video
tampering, or alarm event occurs.
•
Image Size Select a file size ( D1, HD1, 2CIF, CIF ).
•
Image Quality Select a value between 1 and 6 , with 6 being the highest quality.
•
Interval Select a value between 1 SPL (second per picture) and 7 SPL or click
Customized to enter your own setting.
3. Click Apply to save your settings.
4. To copy the settings to additional channels, click Copy , select the channels that you want
to copy the settings to, and then click OK .