Honeywell HRHD 410, Руководство пользователя

Страница: 46 / 128

Configuration
Rev 3.03 28 Document 900.0315
02/07
Figure 3-11 Time Sync Screen
Highlight the box beside Automatic Time Sync and then press to toggle between
On and Off .
Highlight the box beside SNTP Server and then press . Change the numbers by
highlighting them and using the Up and Down arrows to increase or decrease the
number value.
Highlight the box beside Interval and then press . Set the time interval for
synchronization from 30 to 300 minutes.
The box beside System Clock displays the DVR time setting.
The box beside Server Clock displays the time setting of the time server. Highlighting
the Update button and then pressing updates the server clock.
Note The Server Clock displays "–" when the DVR cannot load the time
information from the time server.
The box beside Next Synchronization displays the time when the next synchronization
is scheduled. If you want to synchronize the time instantly, highlight the Now… button
and then press .
Caution When selecting Now… , any video with a later time and date will
be lost if the time and date of a time server is earlier than the last
recorded image of the DVR.