Honeywell HREP216, Руководство пользователя

Страница: 77 / 200

800-15802 - A - 12/2013
System Setup | 77
2. Use the

,

,

,

, and ENTER buttons on the remote control or use the mouse to set
the permissions for both MANAGER and USER groups.
• SEARCH : Set the access permissions for the Search menu.
• ARCHIVING : Set the access permissions for the Backup menu.
• SYSTEM SETUP : Set the access permissions for the System Setup menu.
• RECORD SETUP : Set the access permissions for the Record Setup menu.
• EVENT ACTION CONTROL : Set the permissions to output the alarm or control the
buzzer if an event such as an alarm occurs.
• LISTEN TO AUDIO : Set the permission to listen to the audio.
• REMOTE LOG IN : Set the permission to access remotely.
• SHUTDOWN : Set the permission to shut down the DVR from the System menu.
Note The ADMIN account is the master account and is allowed for all permissions. The
ADMIN account can not be edited for individual permissions.
3. To apply the change, click APPLY at the bottom of the screen.
4. When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
Network Setup
You can set IP address, DDNS and E-mail settings, and check network status.
IP Setup
Edits IP address related properties and the remote service port of the DVR.
1. From SYSTEM SETUP

NETWORK , select IP SETUP (see Figure 4-27 ).
2. Use the

,

,

,

, and ENTER buttons on the remote control or use the mouse to
specify each item of the network settings.
DHCP : If it is checked, set the IP address of the DVR to Dynamic IP.
Note For DHCP address allocation, the DVR should be connected to a
network environment, such as a router, that provides with DHCP server
service.
Simple network hubs may have no DHCP server.