HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B
39
08/10
Figure 2-21
PTZ Parameter Window
Configuring a PTZ Tour
You can configure a PTZ tour for each PTZ camera that is connected to the HREP. Before
you can con figure a PTZ tour, you must configure the presets. See
.
1. Click
TOUR
on the PTZ SETUP menu (see
). The PTZ TOUR window
appears.
Figure 2-22
PTZ TOUR Window
2. Click next to MODE to select
AUTO
to enable PTZ Tour setup.
3. Click on the up/down arrows under the
PRESET NO.
column to select a preset (from
1 to 16), then click on the up/down arrows under the
DWELL TIME
to select a dwell
time (from 1 to 20 seconds).
Note
Even though you can configure up to 255 presets using the PTZ menu, for
configuring a PTZ tour, you can select from only presets numbered 1 - 16.
4. Click
OK
to save the settings or click
CANCEL
to exit without saving.
Configuring the Camera Motion Sensor
Click
MOTION SENSOR
on the left side of the CAMERA menu. The Motion Sensor menu
appears.
Содержание HREP16
