Configuring Monitors for Patients
3 - 24
© 2014 Honeywell HomMed. All rights reserved.
P4820EN.04
4/16/14
Sending
a
Configuration
This section assumes that you are at the
General Settings
screen. Refer to Getting to the
General Settings
Screen
for more information. The password you will need is:
4237.
You have the ability to configure changes (including scheduling, questions, timing, etc.) for this patient at
the monitor and upload them to LifeStream. These changes will overwrite the configuration that currently
exists in LifeStream for this monitor. To send the configuration you have set up in the monitor to
LifeStream:
1. From the
General Setting
screen, select
LifeStream
. The LifeStream screen appears:
2. Select
Send Configuration
. Messages similar to the following appear in the window telling you the
status of communications:
Содержание HomMed Genesis Touch
Страница 1: ......