Configuring System Settings
61
The status LED is enabled by default. To disable it, set
Status LED Control
to
OFF
, and then click
Save
.
Configuring Date and Time Settings
You can configure the date and time settings on the
Setup > System Setup > Date & Time
page.
Changing the Date and Time Format
You can change the format of the date and time that appear in the text overlay on the video.
To change the date format, select one of the following formats from the
Date Format
list:
Year-Month-Day
,
Month-Day-Year
, or
Day-Month-Year
. Click
Save
to apply the settings.
To change the time format, select
24_Hour_Standard
or
12_Hour_Standard
from the
Time
Format
list.
Setting the Date and Time
There are three ways you can set the camera’s date and time. You can manually enter the
date and time, synchronize with your PC’s internal clock, or set up the camera to synchronize
automatically with a Network Time Protocol (NTP) server at regular intervals.
To manually set the date and time, enter the date and time in the
Current Time
fields, and
then click
Save
.
To synchronize the date and time with your PC, click
Sync PC
. If the synchronization is
successful, the message “Save succeeded” appears. You must manually click
Sync PC
each
time you want the date and time to synchronize with the PC.
To synchronize the time with an NTP server:
1.
From the
Time Zone
list, select your time zone.
2.
If you are in an area that observes Daylight Saving Time (DST):
Содержание HMBL8GR1
Страница 1: ...equIP Series Cameras ULTRA HD IP CAMERA H4L6GR2 HBL6GR2 HM4L8GR1 HMBL8GR1 USER GUIDE ...
Страница 2: ......
Страница 3: ...i Revisions Issue Date Revisions A 07 2017 New document ...
Страница 10: ......